HOME | UPLOAD Pic/Video | MY ACCOUNT | MY PROFILE | LOGOUT

A good way to stop a car coming through the drivers door ( by accident of course ) is to get a piece of 8 mm checker plate and cut it to the size from your fire wall to past the center pillar weld a piece of 8 mm thick 20 mm od seamless tube at the top of this plate and at the bottom weld a piece of 20 mm x 20 mm  8 mm thick angle, then drill two holes at the front straight through the front pillar and bolt with some plates  do the same to the center pillar  and run some bolts through the angle through the floor, against  the plate put some 20 mm thick high density foam this will stop you from hitting against the door plate this then can be removed and swapped from car to car and the rear bar across the rear of the seat has something you can bolt it to firmly.

Disclaimer

©2002 International Demolition Derby Association. All information i.e audio, video, text tutorials or otherwise is the intellectual property of the International Demolition Derby Association. By submitting any information to or through this site. Your agree to give the IDDA the rights to use it in various publications on the site as well as off the site.Any and all submissions to this web site will become the property of the IDDA. We will if possible always credit the author of all submissions whether by text link to web site or via posts of articles with authors name/s. All credit will be under the title (Complements: your name). If you do not agree with this then please do not submit any information . All rights reserved Derbypro.com International Demolition Derby Association. For more detail please read our disclaimer