IDDA Garage

   HOME | UPLOAD Pic/Video | MY ACCOUNT | MY PROFILE | LOGOUT

Buy, Sell & Trade Derby Cars and PartsDemolition Derby Members Forum @ Derbypro.comDemo Derby Chat @ Derbypro.comDemolition Derby ProductsInternational Demolition Derby Association Members Video & Profiles

   THE IDDA GARAGE©     Click Here To Go Back To The IDDA Garage

 

 What should the timing be set to for a Chevy 350 with Edelbrock Torker plus camshaft?
 

 

 Complements,
 

 

 

 

Answer

On most stock SB 350s the timing should be fine at 6-8 degree's Before Top Dead Center AKA BTDC. However if the cam is not stock you may want to contact the cam's manufacturer for the best timing suitable for your cam. I personally set the timing until I obtain the best performance.

 

If you are looking for the best performance possible, get a timing light that will check your timing at full advance. Start off at about 40 degrees total timing (engine running above 2800 rpm) and vary it up or down a few degrees until peak performance is found. Best accomplished at a drag strip on test'n'tune night

 



 

 

 

Disclaimer

©2002 International Demolition Derby Association. All information i.e audio, video, text tutorials or otherwise is the intellectual property of the International Demolition Derby Association. By submitting any information to or through this site. Your agree to give the IDDA the rights to use it in various publications on the site as well as off the site.Any and all submissions to this web site will become the property of the IDDA. We will if possible always credit the author of all submissions whether by text link to web site or via posts of articles with authors name/s. All credit will be under the title (Complements: your name). If you do not agree with this then please do not submit any information . All rights reserved Derbypro.com International Demolition Derby Association. For more detail please read our disclaimer